View Single Post
  #2  
Old February 24th 12, 06:06 PM posted to alt.comp.periphs.scanner
Mark F[_2_]
external usenet poster
 
Posts: 164
Default HP Scanner makes everything yellow

On Fri, 24 Feb 2012 08:40:23 -0800 (PST), Sonnich Jensen
wrote:

Hi

Here are some pictures:
http://hot.ee/sonnich/scan1a.jpg
http://hot.ee/sonnich/scan1b.jpg

A is the original picture, 50% in order to make it fit here.
As you can see only a part of it is in the right colours.

A part of the original scan is the B - with "waves" in it, I have seen
that before and know simply to resize. But you can see the colour
difference better.

What causes the yellowness and how can I fix it?

Seems like one or more channels cut out. Also looks
intermittent.

If you repeat the scan does what looks like a good band
happen in the same place each time?

If the good band stays fixed, what happens when you
move the original on the flatbed (don't worry if some parts
are no longer scanned): does the good band stay
fixed on the flatbed or the original?


It is a HP Scanjet 2400.

WBR
Sonnich