A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » Processors » Overclocking AMD Processors
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

80mm 92mm 120 mm fan mounting spacing



 
 
Thread Tools Display Modes
  #1  
Old June 21st 05, 02:53 AM
twobirds
Guest
 
Posts: n/a
Default 80mm 92mm 120 mm fan mounting spacing

How far apart are the mounting holes on a 92mm case fan?

I have a case that is advertized to accept an 80mm or a 120mm fan on the
rear exhaust vent. I accidentally ordered a 92mm fan instead. I didn't
notice until it was too late (it laready shipped). Am I going to need an
adapter? If so, - Well, I see all sorts of 92 to 80mm adapters out there.
I can't seem to find a 92mm to 120mm adapter any where. Is there such a
thing?


  #2  
Old June 21st 05, 04:25 AM
Ed Light
Guest
 
Posts: n/a
Default

You can tape it on.


--
Ed Light

Smiley :-/
MS Smiley :-\

Send spam to the FTC at

Thanks, robots.


  #3  
Old June 21st 05, 05:36 AM
twobirds
Guest
 
Posts: n/a
Default

Ed Light wrote:
You can tape it on.


Though I'm a firm beleiver in mystic abilities of baling wire and duct tape,
I do happen to own a drill and a dremmel tool. Knowing the distance between
the mounting holes would help me make a decision between modding and
ordering another fan. If the 92mm is not suitable for my purpose, it will
find a home on one of my SLK-800s and I'll order a 120. Any idea what the
distance between the mounting holes is either diagonally, horizontally, or
vertically on a standard 92mm fan?




  #4  
Old June 21st 05, 06:58 AM
Ed Light
Guest
 
Posts: n/a
Default

If the case takes 80 and 120, 90 being in between, I'd guess that you can
make holes for it. You can stand it off on rubber grommets too, or use one
of those vibration-damping gaskets.


--
Ed Light

Smiley :-/
MS Smiley :-\

Send spam to the FTC at

Thanks, robots.


  #5  
Old June 21st 05, 11:40 AM
andrew
Guest
 
Posts: n/a
Default

twobirds wrote:
Ed Light wrote:

You can tape it on.



Though I'm a firm beleiver in mystic abilities of baling wire and duct tape,
I do happen to own a drill and a dremmel tool. Knowing the distance between
the mounting holes would help me make a decision between modding and
ordering another fan. If the 92mm is not suitable for my purpose, it will
find a home on one of my SLK-800s and I'll order a 120. Any idea what the
distance between the mounting holes is either diagonally, horizontally, or
vertically on a standard 92mm fan?


According to the Farnell website (a large electronic component supplier
in the UK) the fixing centres for 92mm fans are 71.5mm apart. See
http://uk.farnell.com/jsp/endecaSear...U=149426&N=401
for details.
  #6  
Old June 21st 05, 12:46 PM
Cuzman
Guest
 
Posts: n/a
Default

twobirds wrote:

" How far apart are the mounting holes on a 92mm case fan? "


I typed the words *80mm 92mm fan adapter* in to Google and it magically
brought up this: http://tinyurl.com/9cnw8

  #7  
Old June 22nd 05, 12:21 AM
twobirds
Guest
 
Posts: n/a
Default

Cuzman wrote:
twobirds wrote:

" How far apart are the mounting holes on a 92mm case fan? "


I typed the words *80mm 92mm fan adapter* in to Google and it
magically brought up this: http://tinyurl.com/9cnw8


Looking for a 92 to 120. There is one that is 120 to 92, but it won't suit
my purpose


  #8  
Old June 22nd 05, 12:27 AM
twobirds
Guest
 
Posts: n/a
Default

Cuzman wrote:
twobirds wrote:

" How far apart are the mounting holes on a 92mm case fan? "


I typed the words *80mm 92mm fan adapter* in to Google and it
magically brought up this: http://tinyurl.com/9cnw8


I decided to reply twice.

Listen. Should we put up a sign on usenet that reads: "Just use google.
Human interaction has been replaced" ?? . If you think I don't know how
to use a search box... maybe you can just **** right off. Your "magical
appearance" (of the wrong answer anyway because you didn't read) was not my
chosen method to secure the information I desired. I chose to use usenet.
That's where I might actually find a *person* with the information I want
who is willing to share it with me.

You ****ers who always post, "Use google" and seldom contribute anything of
relavence to threads on usenet can lick my sweaty balls. To state it more
simply - **** you.


  #9  
Old June 22nd 05, 01:24 AM
Bill
Guest
 
Posts: n/a
Default

In article ,
says...
Cuzman wrote:
twobirds wrote:

" How far apart are the mounting holes on a 92mm case fan? "


I typed the words *80mm 92mm fan adapter* in to Google and it
magically brought up this:
http://tinyurl.com/9cnw8

I decided to reply twice.

Listen. Should we put up a sign on usenet that reads: "Just use google.
Human interaction has been replaced" ?? . If you think I don't know how
to use a search box... maybe you can just **** right off. Your "magical
appearance" (of the wrong answer anyway because you didn't read) was not my
chosen method to secure the information I desired. I chose to use usenet.
That's where I might actually find a *person* with the information I want
who is willing to share it with me.

You ****ers who always post, "Use google" and seldom contribute anything of
relavence to threads on usenet can lick my sweaty balls. To state it more
simply - **** you.





Maybe they're just tired of answering lazy, syphlitic, goat blowing
lamers such as yourself. And I mean that in a nice way.


Bill
  #10  
Old June 22nd 05, 01:24 AM
High
Guest
 
Posts: n/a
Default


You ****ers who always post, "Use google" and seldom contribute anything of
relavence to threads on usenet can lick my sweaty balls. To state it more
simply - **** you.


No, **** YOU, why would anyone want to help an ASSHOLE like you. JUST
USE GOOGLE!!
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
80mm Fans -- Annoying Brent Wege Homebuilt PC's 18 June 19th 04 11:43 PM
insulators needed under mobo's mounting screws? RS Homebuilt PC's 0 June 2nd 04 02:38 AM
80mm vs 92mm Fan? Wayne Youngman Overclocking 7 March 28th 04 12:22 PM
Quick Poll - 40mm - 60mm - 80mm - 92mm Fan on your Heatsink? Wayne Youngman Overclocking 11 July 29th 03 09:09 AM


All times are GMT +1. The time now is 10:27 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 ComputerBanter.com.
The comments are property of their posters.