A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » Processors » Overclocking
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

OC'ing old school Asus P4S800D-X



 
 
Thread Tools Display Modes
  #1  
Old April 25th 13, 05:32 PM posted to alt.comp.hardware.overclocking
Luvrsmel
external usenet poster
 
Posts: 1
Default OC'ing old school Asus P4S800D-X

Found a 3.4GHz 478pin Prescott and have pushed it to 3.6GHz stable.
Will run at 3.7GHz but got blue screen after running for a few hours so I
backed it off.
Anyone see any room for improvement with this system?

Operating System Microsoft Windows Vista
Ultimate 6.0.6002 (Vista RTM)

--------[
Overclock ]---------------------------------------------------------------------------------------------------

CPU Properties:
CPU Type Intel Pentium 4
CPU Alias Prescott
CPU Stepping D0
Engineering Sample No
CPUID CPU Name Intel(R) Pentium(R)
4 CPU 3.40GHz
CPUID Revision 00000F34h

CPU Speed:
CPU Clock 3604.3 MHz
(original: 3400 MHz, overclock: 6%)
CPU Multiplier 17x
CPU FSB 212.0 MHz
(original: 200 MHz, overclock: 6%)
Memory Bus 212.0 MHz
DRAM:FSB Ratio 1:1

CPU Cache:
L1 Trace Cache 12K Instructions
L1 Data Cache 16 KB
L2 Cache 1 MB (On-Die, ECC,
ATC, Full-Speed)

Motherboard Properties:
Motherboard ID
63-0602-009999-00101111-061506-SIS655FX$A0149001_BIOS DATE: 06/15/06
11:15:19 VER: 08.00.09
Motherboard Name Asus P4S800D-X (5
PCI, 1 AGP, 4 DDR DIMM, Audio, LAN)

Chipset Properties:
Motherboard Chipset
North Bridge SiS 655FX
Supported FSB Speeds FSB400, FSB533,
FSB800
Supported Memory Types DDR-200 SDRAM,
DDR-266 SDRAM, DDR-333 SDRAM, DDR-400 SDRAM
Revision 50

Memory Controller:
Type Dual Channel
(128-bit)
Active Mode Dual Channel
(128-bit)
Memory Timings 3-5-5-9
(CL-RCD-RP-RAS)
DIMM1: Micron 16VDDT12864AG40BDB 1 GB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Samsung M3 68L6523CUS-CCC 512 MB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
DIMM3: Micron 16VDDT12864AG40BDB 1 GB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM4: Micron 8VDDT6464AG-40BD2 512 MB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

AGP Controller:
AGP Version 3.05
AGP Status Enabled
AGP Device ATI All-in-Wonder
X800
AGP Aperture Size 128 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Current AGP Speed 8x
Fast-Write Not Supported
Side Band Addressing Supported, Enabled

Graphics Processor Properties:
Video Adapter ATI All-in-Wonder
X800
GPU Code Name R420 (AGP 8x 1002 /
4A4B, Rev 00)
GPU Clock 500 MHz (original:
500 MHz)
Memory Clock 500 MHz (original:
500 MHz)



  #2  
Old April 26th 13, 12:29 AM posted to alt.comp.hardware.overclocking
Paul
external usenet poster
 
Posts: 13,411
Default OC'ing old school Asus P4S800D-X

Luvrsmel wrote:
Found a 3.4GHz 478pin Prescott and have pushed it to 3.6GHz stable.
Will run at 3.7GHz but got blue screen after running for a few hours so
I backed it off.
Anyone see any room for improvement with this system?

Operating System Microsoft Windows Vista
Ultimate 6.0.6002 (Vista RTM)

--------[ Overclock
]---------------------------------------------------------------------------------------------------


CPU Properties:
CPU Type Intel Pentium 4
CPU Alias Prescott
CPU Stepping D0
Engineering Sample No
CPUID CPU Name Intel(R)
Pentium(R) 4 CPU 3.40GHz
CPUID Revision 00000F34h

CPU Speed:
CPU Clock 3604.3 MHz
(original: 3400 MHz, overclock: 6%)
CPU Multiplier 17x
CPU FSB 212.0 MHz
(original: 200 MHz, overclock: 6%)
Memory Bus 212.0 MHz
DRAM:FSB Ratio 1:1

CPU Cache:
L1 Trace Cache 12K Instructions
L1 Data Cache 16 KB
L2 Cache 1 MB (On-Die,
ECC, ATC, Full-Speed)

Motherboard Properties:
Motherboard ID
63-0602-009999-00101111-061506-SIS655FX$A0149001_BIOS DATE: 06/15/06
11:15:19 VER: 08.00.09
Motherboard Name Asus P4S800D-X
(5 PCI, 1 AGP, 4 DDR DIMM, Audio, LAN)

Chipset Properties:
Motherboard Chipset
North Bridge SiS 655FX
Supported FSB Speeds FSB400, FSB533,
FSB800
Supported Memory Types DDR-200 SDRAM,
DDR-266 SDRAM, DDR-333 SDRAM, DDR-400 SDRAM
Revision 50

Memory Controller:
Type Dual Channel
(128-bit)
Active Mode Dual Channel
(128-bit)
Memory Timings 3-5-5-9
(CL-RCD-RP-RAS)
DIMM1: Micron 16VDDT12864AG40BDB 1 GB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM2: Samsung M3 68L6523CUS-CCC 512 MB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz)
DIMM3: Micron 16VDDT12864AG40BDB 1 GB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)
DIMM4: Micron 8VDDT6464AG-40BD2 512 MB PC3200 DDR
SDRAM (3.0-3-3-8 @ 200 MHz) (2.5-3-3-7 @ 166 MHz) (2.0-2-2-6 @ 133 MHz)

AGP Controller:
AGP Version 3.05
AGP Status Enabled
AGP Device ATI All-in-Wonder
X800
AGP Aperture Size 128 MB
Supported AGP Speeds 1x, 2x, 4x, 8x
Current AGP Speed 8x
Fast-Write Not Supported
Side Band Addressing Supported, Enabled

Graphics Processor Properties:
Video Adapter ATI All-in-Wonder
X800
GPU Code Name R420 (AGP 8x
1002 / 4A4B, Rev 00)
GPU Clock 500 MHz
(original: 500 MHz)
Memory Clock 500 MHz
(original: 500 MHz)


I see only a three phase regulator on that motherboard.

http://www.pcplanetsystems.com/abc/i...smobo21big.gif

Place a finger on the MOSFETs and coils, near the CPU socket.
If they're getting hot, don't overclock too much further.
If pushed far enough, MOSFETs have their own SOA and version
of thermal runaway.

I have one system here, that when I overclocked it, the
regulator circuits near the CPU socket were getting too hot
and I had to back off.

*******

When you overclock, you generally need a bit more VCore to do it.
Does your motherboard support VCore adjustment ?

I checked the manual, and don't see an adjustment for it.

You might need a "volt mod" for VCore, or, figure out how
to change the VID code being sent to the regulator.

You would also need to research, how much additional VCore,
is safe for a Prescott. I don't have a number in my head for that.

On an enthusiast motherboard, VCore can sometimes be adjusted
at the BIOS level (boost type setting).

VCore voltage, and max frequency, go hand in hand. You will
get a certain amount of overclock, without adjusting Vcore.
To go further than that level, you need more VCore.

http://benchmarkreviews.com/images/r...vs_Voltage.png

On my Asrock board, I did a volt mod, and that boosted the
voltage when I needed it. The voltage regulator in that case,
had an offset feature, so the mod was not too hard to do.

Paul
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sick sound problems from on-board Soundmax audio (ASUS P4S800D) The Berzerker Asus Motherboards 2 September 23rd 04 05:16 PM
Firewire on Asus P4S800D? The Berzerker Asus Motherboards 2 September 18th 04 03:40 AM
CD-Key for Bundled PC-cillin 2002 with ASUS P4S800D The Berzerker Asus Motherboards 1 September 17th 04 06:59 PM
On-board USB 2.0 on ASUS P4S800D The Berzerker Asus Motherboards 3 September 12th 04 03:17 PM


All times are GMT +1. The time now is 12:53 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 ComputerBanter.com.
The comments are property of their posters.