A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » General Hardware & Peripherals » Cdr
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

how do I avoid buffer underrun?



 
 
Thread Tools Display Modes
  #1  
Old November 21st 11, 07:58 AM posted to alt.comp.periphs.cdr
Chelmite
external usenet poster
 
Posts: 1
Default how do I avoid buffer underrun?

I'm trying to write a dual-layer blu-ray using the schily cdrecord
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling

I can create an ISO image that's 38,961,047,552 bytes, which should
fit on a 50G dual-layer blu-ray disk.
I am having trouble writing the image onto the disk. I get a message
about buffer underruns, and need some help fixing this.

Thanks for any help you can give,
Chelmite

I created the iso image with:
% mkisofs -o /media/Maxtor2/Backups/maxtor3.iso -r -J -hide-rr-moved -
V "Backup 2011/11/20" -publisher "Chelmite" -iso-level 4 -graft-points
photos/M3/Photos=/media/M3/Photos photos/M3/JDroid=/media/M3/Backups/
Droid/JDroid/dcim photos/M3/TDK-Vibrant=/media/M3/Backups/Droid/
JVibrant/DCIM photos/M3/SDroid=/media/M3/Backups/Droid/SDroid/dcim
photos/M3/SVibrant-KD=/media/M3/Backups/Droid/SVibrant1/KDROID32/dcim
photos/Maxtor3/SVibrant-SD=/media/M3/Backups/Droid/SVibrant1/SDROID/
DCIM
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows
in the OS.

Then I tried to write the iso:
% /opt/schily/bin/cdrecord tsize=19023949s -dao fs=12m speed=-1
driveropts=burnfree dev=/dev/sr1 - /media/Maxtor2/Backups/
maxtor3.iso
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'BD-RW BDR-206D'
Revision : '1.56'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
WARNING: Phys disk size 4452354 differs from rzone size 24438784!
Prerecorded disk?
WARNING: Phys start: 25088 Phys end 4477441
Starting to write CD/DVD/BD at speed 8 in real SAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 BA 74 10 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32768
cmd finished after 13.786s timeout 200s
write track data: error after 25025347584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this
drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

1. I ran this command without driveropts=burnfree, and got a message
saying I should use that same burnfree option:
cmd finished after 11.627s timeout 200s
write track data: error after 25,025,347,584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

2. I ran the cdrecord command as root both times, yet cdrecord warned
that I should be root.
3. I don't know how to enable DMA. I do have AHCI enabled in the BIOS.
4. My data source is connected to my computer via eSATA.
5. My Blu-ray writer is connected at the slower, USB-2.0 port, to
avoid buffer underruns.
6. Pioneer says the Blu-ray writer is supposed to work at 12x speed,
and has a 4M buffer. My laptop has 4G RAM, 0.25G free.
  #2  
Old November 24th 11, 03:59 AM posted to alt.comp.periphs.cdr
Gernot Hassenpflug
external usenet poster
 
Posts: 53
Default how do I avoid buffer underrun?

Chelmite writes:

I'm trying to write a dual-layer blu-ray using the schily cdrecord
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling


Hi,
I'm a long-time (10yrs) linux user but not really up to speed on
CD/DVD/BluRay writing. I used to use the same method as you, for CDs and
DVDs, since the GUI tools misbehaved os badly until recently.

Now though, I am happy to use Brasero most of the time with Debian
GNU/linux.

I can create an ISO image that's 38,961,047,552 bytes, which should
fit on a 50G dual-layer blu-ray disk.
I am having trouble writing the image onto the disk. I get a message
about buffer underruns, and need some help fixing this.

Vendor_info : 'PIONEER '
Identifikation : 'BD-RW BDR-206D'
Revision : '1.56'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.


Looks like you have a problem here already with communication?

cdrecord: Warning: The DMA speed test has been skipped.
WARNING: Phys disk size 4452354 differs from rzone size 24438784!
Prerecorded disk?


/../

Hmmm, I don't know, but would you try with Brasero for example, and see
what the Brasero logs tell you. So many options with the commands
possible, hard for me to say if something needs to be changed....
--
Gernot Hassenpflug
  #3  
Old November 29th 11, 01:54 AM posted to alt.comp.periphs.cdr
Tony[_3_]
external usenet poster
 
Posts: 72
Default how do I avoid buffer underrun?

I'm actually using the same blu-ray writer as you and the writer will
write 4X and 6X blanks at 12X speed with ease with the write speed set to
maximum. Your buffer underuns are because your Pioneer writer it connected
to the usb 2.0 port. You can only burn a DVD-+R at around 8 times speed
and that speed would be too slow for burring a BD-R so you need to install
the Pioneer writer internally and use UDF 2.5 and something that always
works for software. I mostly use TMPGEnc Authoring Works 4.

Chelmite wrote:

I'm trying to write a dual-layer blu-ray using the schily cdrecord
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling

I can create an ISO image that's 38,961,047,552 bytes, which should
fit on a 50G dual-layer blu-ray disk.
I am having trouble writing the image onto the disk. I get a message
about buffer underruns, and need some help fixing this.

Thanks for any help you can give,
Chelmite

I created the iso image with:
% mkisofs -o /media/Maxtor2/Backups/maxtor3.iso -r -J -hide-rr-moved -
V "Backup 2011/11/20" -publisher "Chelmite" -iso-level 4 -graft-points
photos/M3/Photos=/media/M3/Photos photos/M3/JDroid=/media/M3/Backups/
Droid/JDroid/dcim photos/M3/TDK-Vibrant=/media/M3/Backups/Droid/
JVibrant/DCIM photos/M3/SDroid=/media/M3/Backups/Droid/SDroid/dcim
photos/M3/SVibrant-KD=/media/M3/Backups/Droid/SVibrant1/KDROID32/dcim
photos/Maxtor3/SVibrant-SD=/media/M3/Backups/Droid/SVibrant1/SDROID/
DCIM
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows
in the OS.

Then I tried to write the iso:
% /opt/schily/bin/cdrecord tsize=19023949s -dao fs=12m speed=-1
driveropts=burnfree dev=/dev/sr1 - /media/Maxtor2/Backups/
maxtor3.iso
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'BD-RW BDR-206D'
Revision : '1.56'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
WARNING: Phys disk size 4452354 differs from rzone size 24438784!
Prerecorded disk?
WARNING: Phys start: 25088 Phys end 4477441
Starting to write CD/DVD/BD at speed 8 in real SAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 BA 74 10 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32768
cmd finished after 13.786s timeout 200s
write track data: error after 25025347584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this
drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

1. I ran this command without driveropts=burnfree, and got a message
saying I should use that same burnfree option:
cmd finished after 11.627s timeout 200s
write track data: error after 25,025,347,584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

2. I ran the cdrecord command as root both times, yet cdrecord warned
that I should be root.
3. I don't know how to enable DMA. I do have AHCI enabled in the BIOS.
4. My data source is connected to my computer via eSATA.
5. My Blu-ray writer is connected at the slower, USB-2.0 port, to
avoid buffer underruns.
6. Pioneer says the Blu-ray writer is supposed to work at 12x speed,
and has a 4M buffer. My laptop has 4G RAM, 0.25G free.


--
The Grandmaster of the CyberFROG

Come get your ticket to CyberFROG city

Nay, Art thou decideth playeth ye simpleton games. *Some* of us know
proper manners

Very few. I used to take calls from *rank* noobs but got fired the first
day on the job for potty mouth,

Bur-ring, i'll get this one: WHAT'S YOUR PROBLEM JERK!!? We're here to
help you dickweed, ok, ok give the power cord the jiggily piggily wiggily
all the while pushing the power button repeatedly now take everything out
of your computer except the power supply and *one* stick of ram. Ok get
the next sucker on the phone.

Deirdre Straughan (Roxio) is a LIAR (Deirdre McFibber)

There's the employer and the employee and the FROGGER and the FROGEE,
which one are you?

Hamster isn't a newsreader it's a mistake!

El-Gonzo Jackson FROGS both me and Chuckcar (I just got EL-FROG-OED!!)

I hate them both, With useless bogus bull**** you need at least *three*
fulltime jobs to afford either one of them

I'm a fulltime text *only* man on usenet now. The rest of the world
downloads the binary files not me i can't afford thousands of dollars a
month

VBB = Volume based billing. How much can we force up your arse sir?

UBB = User based bullFROGGING

Master Juba was a black man imitating a white man imitating a black man

Using my technical prowess and computer abilities to answer questions
beyond the realm of understandability

Regards Tony... Making usenet better for everyone everyday

This sig file was compiled via my journeys through usenet


  #4  
Old November 29th 11, 01:59 AM posted to alt.comp.periphs.cdr
Tony[_3_]
external usenet poster
 
Posts: 72
Default how do I avoid buffer underrun?

Now that i read all youir **** maybe you need DVDFab but sometimes the
main movie is broken into two parts (especially with 3D movies) instead of
one and unless you use clone instead of copy it will only pick up the
first part of the MPEG-TS video file.

Chelmite wrote:

I'm trying to write a dual-layer blu-ray using the schily cdrecord
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling

I can create an ISO image that's 38,961,047,552 bytes, which should
fit on a 50G dual-layer blu-ray disk.
I am having trouble writing the image onto the disk. I get a message
about buffer underruns, and need some help fixing this.

Thanks for any help you can give,
Chelmite

I created the iso image with:
% mkisofs -o /media/Maxtor2/Backups/maxtor3.iso -r -J -hide-rr-moved -
V "Backup 2011/11/20" -publisher "Chelmite" -iso-level 4 -graft-points
photos/M3/Photos=/media/M3/Photos photos/M3/JDroid=/media/M3/Backups/
Droid/JDroid/dcim photos/M3/TDK-Vibrant=/media/M3/Backups/Droid/
JVibrant/DCIM photos/M3/SDroid=/media/M3/Backups/Droid/SDroid/dcim
photos/M3/SVibrant-KD=/media/M3/Backups/Droid/SVibrant1/KDROID32/dcim
photos/Maxtor3/SVibrant-SD=/media/M3/Backups/Droid/SVibrant1/SDROID/
DCIM
Warning: Creating ISO-9660:1999 (version 2) filesystem.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows
in the OS.

Then I tried to write the iso:
% /opt/schily/bin/cdrecord tsize=19023949s -dao fs=12m speed=-1
driveropts=burnfree dev=/dev/sr1 - /media/Maxtor2/Backups/
maxtor3.iso
Cdrecord-ProDVD-ProBD-Clone 3.01a06 (x86_64-unknown-linux-gnu)
Copyright (C) 1995-2011 Joerg Schilling
scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'PIONEER '
Identifikation : 'BD-RW BDR-206D'
Revision : '1.56'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 BD-R driver (mmc_bdr).
Driver flags : NO-CD BD MMC-3 BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
WARNING: Phys disk size 4452354 differs from rzone size 24438784!
Prerecorded disk?
WARNING: Phys start: 25088 Phys end 4477441
Starting to write CD/DVD/BD at speed 8 in real SAO mode for single
session.
Last chance to quit, starting real write 0 seconds. Operation
starts.
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 BA 74 10 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32768
cmd finished after 13.786s timeout 200s
write track data: error after 25025347584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this
drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

1. I ran this command without driveropts=burnfree, and got a message
saying I should use that same burnfree option:
cmd finished after 11.627s timeout 200s
write track data: error after 25,025,347,584 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: Try to use 'driveropts=burnfree'.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS
set up.

2. I ran the cdrecord command as root both times, yet cdrecord warned
that I should be root.
3. I don't know how to enable DMA. I do have AHCI enabled in the BIOS.
4. My data source is connected to my computer via eSATA.
5. My Blu-ray writer is connected at the slower, USB-2.0 port, to
avoid buffer underruns.
6. Pioneer says the Blu-ray writer is supposed to work at 12x speed,
and has a 4M buffer. My laptop has 4G RAM, 0.25G free.


--
The Grandmaster of the CyberFROG

Come get your ticket to CyberFROG city

Nay, Art thou decideth playeth ye simpleton games. *Some* of us know
proper manners

Very few. I used to take calls from *rank* noobs but got fired the first
day on the job for potty mouth,

Bur-ring, i'll get this one: WHAT'S YOUR PROBLEM JERK!!? We're here to
help you dickweed, ok, ok give the power cord the jiggily piggily wiggily
all the while pushing the power button repeatedly now take everything out
of your computer except the power supply and *one* stick of ram. Ok get
the next sucker on the phone.

Deirdre Straughan (Roxio) is a LIAR (Deirdre McFibber)

There's the employer and the employee and the FROGGER and the FROGEE,
which one are you?

Hamster isn't a newsreader it's a mistake!

El-Gonzo Jackson FROGS both me and Chuckcar (I just got EL-FROG-OED!!)

I hate them both, With useless bogus bull**** you need at least *three*
fulltime jobs to afford either one of them

I'm a fulltime text *only* man on usenet now. The rest of the world
downloads the binary files not me i can't afford thousands of dollars a
month

VBB = Volume based billing. How much can we force up your arse sir?

UBB = User based bullFROGGING

Master Juba was a black man imitating a white man imitating a black man

Using my technical prowess and computer abilities to answer questions
beyond the realm of understandability

Regards Tony... Making usenet better for everyone everyday

This sig file was compiled via my journeys through usenet


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Buffer Underrun Sound [email protected] Cdr 4 March 25th 06 03:35 AM
Possibly not problem with buffer overrun or underrun? My father's son Cdr 2 April 16th 04 01:58 PM
Philips 1200 Buffer Underrun Question Ric Kaysen Cdr 0 March 25th 04 11:49 AM
What if there are thousands of buffer underrun? Chan WK Cdr 18 January 13th 04 09:31 PM
Is Buffer Underrun Protection good? Harry Muscle Cdr 3 November 15th 03 12:16 AM


All times are GMT +1. The time now is 09:49 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 ComputerBanter.com.
The comments are property of their posters.