A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » General Hardware & Peripherals » Homebuilt PC's
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

Automatic wire strippers!



 
 
Thread Tools Display Modes
  #21  
Old April 15th 17, 03:58 PM posted to alt.comp.hardware.pc-homebuilt,free.spam
John Doe[_9_]
external usenet poster
 
Posts: 392
Default Automatic wire strippers!

These were not available "40 years ago". Nor must you "get the wire into
the right hole".

Apparently this idiot cannot follow a link and does not even know
what tool it is talking about...

--
Michael Black et472 ncf.ca wrote:

Path: eternal-september.org!news.eternal-september.org!feeder.eternal-september.org!nntp-feed.chiark.greenend.org.uk!ewrotcd!news.xcski.com !ncf.ca!not-for-mail
From: Michael Black et472 ncf.ca
Newsgroups: alt.comp.hardware.pc-homebuilt
Subject: Automatic wire strippers!
Date: Sat, 15 Apr 2017 00:02:46 -0400
Organization: National Capital Freenet, Ottawa, Ontario, Canada
Lines: 83
Sender: et472 mtrlpq4362w-lp140-02-65-94-148-220.dsl.bell.ca
Message-ID: alpine.LNX.2.02.1704142356340.7080 darkstar.example.org
References: ocmcis$1b8$1 dont-email.me el856hFr2bkU1 mid.individual.net ocooou$2u4$1 dont-email.me ocp0km$uo7$1 dont-email.me
NNTP-Posting-Host: mtrlpq4362w-lp140-02-65-94-148-220.dsl.bell.ca
Mime-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed
X-Trace: theodyn.ncf.ca 1492228462 14327 65.94.148.220 (15 Apr 2017 03:54:22 GMT)
X-Complaints-To: complaints ncf.ca
NNTP-Posting-Date: 15 Apr 2017 03:54:22 GMT
In-Reply-To: ocp0km$uo7$1 dont-email.me
User-Agent: Alpine 2.02 (LNX 1266 2009-07-14)
Xref: news.eternal-september.org alt.comp.hardware.pc-homebuilt:35970

On Thu, 13 Apr 2017, Paul wrote:

John Doe wrote:
VanguardLH V nguard.LH wrote:

http://www.irwin.com/tools/pliers-ad...wrenches/self-
adjusting-wire-stripper

https://www.amazon.com/IRWIN-VISE-GR...ting-Stripper-
2078300/dp/B000OQ21CA/ref=sr_1_3?ie=UTF8&qid=1492117062&sr=8-3
&keywords=Self-Adjusting+Wire+Stripper

Tried it on some regular power cord wire. Wonderful. I so
wish I had this decades ago. Then again, it wasn't available
decades ago. Not that I do that much, but it would have been
so much nicer. Wire stripping has always been a hassle. I do
not like losing a strand or two of stranded wire. Apparently
this tool does not damage the wire.


Automatic wire strippers have existed for a long time.

We had a pair at work.

Only problem with them was:

1) Price. They charged "industrial" prices for them.
2) Probably didn't work quite as well as the one you got.

They look like a good idea, which is why I've had a set for almost 40
years, getting it for Christmas one year.

But they don't work out the same way.

You get used to using cutters to strip off insulation, getting the depth
right, and it's relatively easy.

You do have to fuss with automatic wire strippers, to get the wire into
the right hole (though some use some other method like a plastic razor
blad or something so you don't have to fit the wire into the hole).

But the biggest issue is they don't work where they might best be used.
If you have a short piece of wire, it's hard to hold the wire and then the
cutters to get the insulation off. But if the wire is too short, the tool
hasn't got enough space to hold the wire, either.

I thought they'd be great if you needed to strip a piece of wire already soldered into a
circuit, where again you may not get a tight grip on the wire, and the
soldered joint isn't strong enough to hold as you strip. But the auto
wire strippers are big, and use up a lot of space in operation, and that
limits their use in tight chassis.

So after a period of using them, I exiled them to the back of the tool
drawer, a neat idea that doesn't work out so well in everyday use.

I suppose if I was stripping a lot of wire of the same length, they might
be useful.

Michael


I played with ours at work, but

felt no attraction to them. They were a novelty item in the tool chest.

I did most of my work with this style.

http://www.officedepot.com/a/product...Stripper-Wire/

Everyone has probably seen this kind, and these suck.
It takes a good deal of practice to keep the wire
nicking to a minimum. I used these for some number of
years as a hobbyist, before I got my first T-5 style
stripper. The non-automated ones still take practice,
but the ones in the following picture make the practice
brutal. I expect a lot of people, this is all they had
on sale at the hardware store.

http://www.canadiantire.ca/en/pdp/ma...9937p.html#srp

And there are all sorts of insulation types, each with
their own foibles. Not every wire stripping job is easy.

Paul




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
3 wire power led cable-2 wire MoBo connection Allen Drake Homebuilt PC's 14 December 19th 11 01:18 AM
Automatic fan controller Jamie_Manic Overclocking AMD Processors 0 August 18th 04 07:02 PM
2 wire vs 3 wire CPU fans, does it matter? -Alby Hewlet Homebuilt PC's 2 July 18th 04 12:19 AM
80 Wire vs 40 Wire for DVD burner and CDROM Striker Gigbyte Motherboards 3 January 26th 04 06:58 PM


All times are GMT +1. The time now is 01:54 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 ComputerBanter.com.
The comments are property of their posters.