A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » Processors » AMD x86-64 Processors
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

overclocking the right way?



 
 
Thread Tools Display Modes
  #1  
Old January 14th 06, 08:16 PM posted to alt.comp.hardware.amd.x86-64
Guest
 
Posts: n/a
Default overclocking the right way?

My computer is a XP 2600 Barton, A7N8X-X ASUS, ATI AIW 9600.

When I overclocked before, I would set my RAM at "By SPD" and either inch
the fsb up or simply set it at 200 and the voltage at 1.775. Either way, I
always had stability problems. Today I set the voltage at AUTO, the Ram at
100% or 1:1(whatever your used to) and inched the FSB all the way to 196(No
probs on the way up either. CPU at 2.26Ghz. When in bios, the voltage was at
1.69). At 200 the 3DMark 2001 SE crashed. Anyways, overclocking seems to be
a whole lot smoother going if you set the ram to always run at the same
speed as the fsb. My computer feels 100% stable so far, I don't see any of
the hiccups I had with it when overclocked before. My score with a mild
overclock on the Vid card using ATITool is 11150(Using the vid card drivers
that came with the disk).Overclocking a 4200 upto 4800 specs will be
interesting and probably not hard at all to accomplish. And remember, since
the 3800 X2 is not the same chipset as the 4200- 4800 X2's, it will
overclock different. But I would take a 3800 X2 over the fastest single core
processor any day.


  #2  
Old January 15th 06, 01:36 AM posted to alt.comp.hardware.amd.x86-64
Guest
 
Posts: n/a
Default overclocking the right way?

Probably someone here will help.

Note: This is the 64-bit AMD group.

You might try alt.comp.hardware.overclocking.amd

Lots of 32-bit overclocking there.


--
Ed Light

Smiley :-/
MS Smiley :-\

Send spam to the FTC at

Thanks, robots.

Bring the Troops Home:
http://bringthemhomenow.org

Fight Spam:
http://bluesecurity.com





  #3  
Old January 15th 06, 04:48 PM posted to alt.comp.hardware.amd.x86-64
Guest
 
Posts: n/a
Default overclocking the right way?

Just making a point that overclocking the dual-core processors might be
easier if good ram is used that runs faster than pc3200, set it to run at
the same speed as the fsb, and overclocking the processors would go
smoother, and more stable. This is why when I bought a XP2100, I bought
pc3200 to avoid buying ram everytime I bought a processor.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
req help: overclocking Abit IC7 Max3 board tg Overclocking 3 December 13th 05 03:22 PM
Overclocking A Pentuim 2 - 300 MHz -Rokitman- Overclocking 9 November 20th 05 01:52 PM
General Guide to Overclocking the Intel CPU Phil Weldon Overclocking 2 November 18th 05 09:23 PM
Some questions on overclocking Random Person General 3 September 11th 05 01:54 AM
OverClocking Guides Phil Weldon Overclocking 0 August 15th 03 05:41 AM


All times are GMT +1. The time now is 03:41 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 ComputerBanter.com.
The comments are property of their posters.