A Computer hardware and components forum. ComputerBanter.com

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » ComputerBanter.com forum » Motherboards » Gigbyte Motherboards
Site Map Home Authors List Search Today's Posts Mark Forums Read Web Partners

7vaxp ultra sata controller bios and SATA data corruption



 
 
Thread Tools Display Modes
  #1  
Old December 1st 03, 02:18 PM
Dimitris
Guest
 
Posts: n/a
Default 7vaxp ultra sata controller bios and SATA data corruption

Is there a utility to flash the bios of the onboard silicon image sata
controller? Its bios is 4.1.35c and the seagate barracude 120 has data
corruption problems. I installed a pci silicon image controller and
had to flash its bios(it came with 4.1.34!!) to 4.2.15 in order to
make it work with the Seagate.
The newest bios at the gigabyte site is F6 but the embedded bios of
the onboard controller remains 4.1.35c after i flash the mobo bios to
F6. So problems remained till i got the pci controller
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
D850GB P13 BIOS Can't select to boot from ADAPTEC 2410sa SATA RAID controller seen as SCSI S Intel 1 March 10th 04 12:31 PM
Problem booting from SATA disk with GA-8KNXP motherboard (like many others) Eric Janvier Gigbyte Motherboards 9 November 22nd 03 01:56 AM
GA-8KNXP, how to configure BIOS for SATA? John Ward Gigbyte Motherboards 20 October 6th 03 07:42 AM
8knxp bios Tim Gigbyte Motherboards 0 August 20th 03 02:03 AM
[GA-sinxp1394] problem accessing siI3112A sata raid bios andrea agnoletti Gigbyte Motherboards 1 August 1st 03 03:52 AM


All times are GMT +1. The time now is 05:50 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 ComputerBanter.com.
The comments are property of their posters.